Icoteck Cable Management | Highwood Special Products | ELFIN, TESCH, SENSOPART, CEDES, ICOTEK

UL Info

2010 Catalog

Cable Entry Solutions!

No more cutting cables thanks to Icotek's split frame, split grommet and pass through membrane products. Icotek's Cable Management Products have a solution for all your molded or prewired cables and pipes. Simple and inexpensive solution for routing servo cables, computer cables, D-Sub connections, valve connectors and because you don't have to cut cables you don't have to worry about voiding cable warranties!

Features:

IP 54, IP 65, and IP 66 Solutions
Wide Cable Clamping Ranges accomodate cable diameters from 1 - 65mm including many special types
Multi Range Grommets/Inserts available
Silicon and Halogen free Grommets/Inserts available
High Chemical Resistance Grommets/Inserts available
Industry standard knock out for frames (same dimension as popular multi-pole connectors Harting, Wieland, Ilme)
Unique push through membrane in KEL-DP line takes guess work out of cable diameters

*For full product offering please visit www.icotek.de

90 Degree Cable Entry The split cable glands KVT - W90 are an excellent solution to insert and seal prefabricated cables with an 90° angle. In particular, the KVT 50-W90 is perfectly suited to hold corrugated hoses on housing walls.	KEL-FL The KEL FL range provides an easy, flexible and quick insertion and sealing of flat cables. For flat cables the new range of FT inserts are used. By the innovative design of the inserts, tolerances of the flat cables can be compensated very well. With the new KEL-FL frames, pre-terminated cables up to 17 mm and flat cables can be inserted with only 1 frame.
LFZ/SKL The LFZ/SKL is an advancement of the proven LF/SKL series. By using the possibility of strain relief with a conventional cable tie, the LFZ/SKL series combines both EMC shielding and strain relief in a perfect way.	DT Cable Inserts The Icotek DT cable inserts are designed for standard cables (without connectors). A large number of cables can be routed utilizing minimal space. With only one standard KEL frame, a perfect combination of routing pre-terminated and standard cables is now possible. Another outstanding advantage is the possibility of a sub-assembly of cable harnesses.
KEL-183 Cable Entry Frames Routing a cable up to 75 mm diameter? No problem anymore! The new split cable entry frames KEL 183 enables routing and sealing according to IP 54.	KEL-DPZ-E Cable Entry Plates KEL-DPZ-E are designed for routing standard cables (without connectors). With an area of only 109 x 15 mm, up to 23 cables can be easily routed and sealed according to IP65. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. ST Plugs can be used for sealing pierced membranes if cables are removed.
RFLZ-EMC Clamp Assembly with Strain Relief For safe and effective absorption of high-frequency interferences, the SKL shield clamps are proven excellence. For applications that involve numerous cables, the RLFZ series provide the possibility to guide up to 12 cables. The combination of EMC shielding and strain relief is a key feature of this system.	KEL B1 New small rectangular split frame. Available in various frame sizes to accomodate one large grommet or four small grommets. For more information--please contact us!
KEL The cable entry system is a combination of cable entry frame and captive split inserts. The extraordinary advantage for all kinds of applications is the consequential split of the system, which enables a retro-fit of pre-fabricated cables and wires. Especially suitable for the following applications: measuringservo-, computer-cables and bus-systems. The KEL-System is available in two sizes. Cables with different diameters can be installed using the captive split inserts. Both a high protection to IP 54 and strain relief are achieved through correct selection of inserts depending on cable diameter. A gasket (included in packing) between frame and surface of the cabinet provides a seal and balances roughness. Supplier-warranty of pre-fabricated cables remains valid, as connectors do not have to be unsoldered and then soldered on again.	KEL E-2 Two Insert Frame KEL-E is the smallest series of the KEL product group. Perfect if space is limited. Available in 2 insert and 5 insert frame.
KEL JUMBO FLEX NEW!! KEL-Jumboflex allows cable/pipe or hoses to be passed by simply cutting the conical grommet to the appropriate diameter. Diameters are listed on the grommet itself taking the gueswork out of the installation process. Cables up to 68mm in diameter!!	KVT Only need to pass a few cables--use the KVT Circular Solutions. The systems are available in 3 sizes (25mm though hole, 32 or 63mm through hole) capable of accomodating cable diameters from 3-34mm. Gasket is included.
KEL Jumbo KEL-JUMBO cable entry system for installation of cables and conduits up to 65 mm diameter. Product has 4 main features: surrounding membrane allows seal to float; large, flexible and adaptive seal area; rigid outer support; split frame and grommet	KEL Quick Cost effective solution for less demanding applications. Same features and benefits as standard KEL (split frame and split grommets) but less expensive. Split frames snaps together without the need for hardware or tools.
KEL-FG - flanged cable entry Install pre-manufactured cables at an angle of 90 degress to the cabinet. Split Frame and Split Grommets make for easy installation. Angled Housing shields cables from falling debris, water and drips. Cables are guided into the panel/wall in an orderly manner. Great solution for cables, pipes and conduits. High packing density. KEL-FG A can be snapped onto KEL-SNAP - very quick assembly and disassembly	KEL QTA No tools necessary for mounting frame to panel! Split flexible frame has integrated groove that holds KEL QTA firmly within panel/sheet metal. Circular and rectangular versions available.
KEL DP The cable entry plate is a simple push fit into the standard cut-out. KEL DP provides tight seal around cables by simply pushing cables through thin membrane. Takes the work out of determining cable diameter, simple installation and very cost effective! Available in circular or rectangular.	KEL DPZ Populate frame and pass thhrough cables within seconds without the need for tools! Automatically seals and provides strain relieved, twofold sealing of cables, twofold strain relief of cables, extremely flat design with 10 mm, installation height suitable for standardized cut-out of 24-pole connector
KT Grommet Split Grommet available from 3-35mm clamping range. Grey and Black available depending on specific requirements	KTM Multi Range Grommets Cable inserts multiple-range (not suitable for pre-fabricated cables). Grey in color and available in the following sizes: 2,5 - 6,5 mm, 4,0 - 7,5 mm, 6,5 - 10,0 mm, 9,5 - 13,0 mm
Strain relief systems Strain relief systems KZL and ZL are used for organising different cables on machines and control panels. Through highly flexible power cable ties in combination with an undercut at the comb-shaped profile of the KZL / ZL a secure strain relief according to DIN-EN-50262 is achieved. Please contact us for all strain relief options!	EMC Solutions Wide range of shield clamps available for applications where the shield of single cables has to grounded. Please contact us for all your shielding options!
KEL EMC KEL Split Frame with EMC Shielding all in one! Many variations available--please contact us for more information.	Idem Safety Products In association with Sentec Automation, we are pleased to offer Idem Safety Products. Idem offers a complete line of stainless steel IP69K safety interlock switches. Idem also offers a complete line of safety switches for explosion proof areas and standard industrial environments. Please visit www.sentecautomation.com for more information.